Cut Quick Parts and Repairs

ORDER SPARE PARTS HERE

I service and sell parts for Husqvarna and Guarda demolition saws.

See my new saws for sale Click Here

I always carry a large range of genuine and after market Husqvarna and Guarda power FTR095 cutter parts in stock in W.A. including all consumable spare parts, and many others as well.
These include the common spares for the current models of FTR095, K760, K770, K960 and K970.
I carry some selected parts for the Partner K750 and K950, and for K1260 and K1270, including rail saws.
I also have some K950 and K970 ring saw parts.

Be aware, some after market spare parts available online are extremely poor quality copies.
I only sell the aftermarket parts that I use in our workshop, where I guarantee the repairs.
If you see aftermarket parts at extremely cheap prices, they will not be good quality, and will cost you more in the long run.

To see our range of downloadable manuals:

Spare parts manuals Click Here 

Operation manuals Click Here 

Common parts we carry in stock:

  • Air cleaner elements
  • Drive Belts
  • Spark plugs - genuine $10 ea
  • Fuel filters - genuine $22 ea
  • Vibration mounts
  • Clutch springs and assemblies
  • Pull starter parts and assemblies
  • Mufflers
  • Carbie kits
  • Cylinder and piston kits (from $275 incl GST)
  • Gasket sets
  • Multi tool - genuine. Plug spanner, 13mm spanner and T27 Torq.
    I also carry spares for core drills  - see the core drill page here.

K950 and K970 Rings saws:
Many K970 parts are interchangeable with the ring saws eg pull starter, air filter, carbie, muffler etc.
And I carry these in stock.
UDT also carry in stock specific ring saw parts like:

  • Blade rollers
  • Drive belt
  • Blades

Ring saw parts manuals Click Here 

ORDER ALL SPARE PARTS ONLINE HERE

amk750-k760.jpg amk960-k970.jpg amk1260-parts.jpg

I have a somesecond hand parts available for sale.
This can be especially helpful to replace those expensive items such as blade guards, plastic covers etc.

I carry selected Husqvarna K3000 and K4000 electric saw spare parts in stock, such as brushes, blades, gearbox grease, RCD's etc.

HUSQVARNA K760/K770 AIR FILTER

Description

k760-air-cleaner-element.png K760/770 AIR FILTER (incl spill filter) 574 36 23 02

IN STOCK $82

(After market $40)

HUSQVARNA K970/1260 AIR FILTER

Description

 am-air-filter-.png Husqvarna K970/K1260/K1270 AIR FILTER 510 24 41 - 03 .

IN STOCK $65

(After market $35)

HUSQVARNA K950/960 AIR FILTER

Description

 hu_k960_air.jpg Husqvarna K950/960 AIR FILTER 50634 70-02

IN STOCK $105

(After Market $40)

HUSQVARNA DRIVE BELTS

Description

HUSQVARNA K760 QUICK CUT DEMOLITION SAW K750/K760 BELT $55
(After market $35)
K770 Belt $53
K950 - $30
K960 - $55
K970 - from $50 (After market $40) K1260/1270 Belt - $85 (After market $40)

IN STOCK

Aftermarket Cylinder, piston and ring set

Description

  HUSQVARNA K760 QUICK CUT DEMOLITION SAW

These are the kits we use in our workshop.

K750/K760 $275 (Fits K750 & K760 prior to 2013)
K760/K770 $250 (Genuine $799)
K960 $195 (side decompression button)
K970 $350 (top decompression button). Genuine $750.
K1260 $250 (side decompression button)
(all each, incl GST)
Tip - if you ran your saw with unleaded fuel, the bottom end is likely damaged as well as cylinder and piston. Replacing top end only is unlikely to fix it. Not worth repairing.

HUSQVARNA Recoil Assy

Description

  HUSQVARNA K760 QUICK CUT DEMOLITION SAW

K750/K760/K770 $105  
K960/K970 $99
K760/K960 - second hand from $50
All in stock

Tip - To fit - pull cord out approx 30cm. Place starter on machine and slowly release cord so starter pawls engage correctly. Tighten 4 bolt (check regularly for tightness)

Water fittings, spring mounts

 
  HUSQVARNA K760 QUICK CUT DEMOLITION SAW

Husqvarna Water Fittings:

Old style, suit K760 and K960
(suit thicker hose - 10mm OD )

New style, suit K770 and K970
(Suit newer, thinner hose - 8mm OD, 4mm ID )

Vibration mounts to suit most models

HUSQVARNA Two stroke Oil 1 litre

Description

  HUSQVARNA K760 QUICK CUT DEMOLITION SAW

1 Litre Husqvarna Low Smoke ( LS+ )

-or -

1 Litre Husqvarna Oil Guard

 In stock - $20 each

gasket-set-1.jpg gasket-set-2.jpg gasket-set-3.jpg

Oilguard Bypass Switch

The K760 Oil Guard saw must use special two stroke oil, otherwise it runs only at half power.
If you want to run your saw off ordinary two stroke oil, you can remove the OilGuard plug and replace it with this one to turn OilGuard off. Instructions included.
$20 incl GST

fullsizerender.jpeg

Second Hand Parts:

I have a good range of used parts.
Bring in your faulty parts and I will try to match them up with good second hand ones at half the price of new,  like these:

  • Ignition coils with lead and plug cap $65 (all tested and working fine)
  • Starter assemblies from $50
  • Flywheels from $50
  • Carbies, blade guards, plastic covers, blade flanges, hard to get/expensive items all available.

2nd-hand.jpg2nd-hand-2.jpg

Prices correct as of 1/10/24 but subject to change.

ORDER SPARE PARTS HERE

Downloadable information sheets:

Replace Cut Quick Starter Rope

Replace K760 piston and cylinder

Replace muffler - most models

Troubleshooting - most models

See our Cylinder and piston kits to suit K760, K770, K960 and K970.

Trouble shooting pistons 

Replace piston and cylinder - other models

This video shows you how to change the belts on your Husqvarna K970 cut quick demolition saw:

Servicing

I service Husqvarna and Guarda petrol saws. A service includes:

  • Pressure washer cleaning
  • Check air and fuel filter
  • Check clutch, springs and belt (tension belt if necessary)
  • Check spark plug
  • Check vibration springs, muffler and body
  • Full function test
    Services for Guarda or Husqvarna K760/K770/K960/K970 are approximately $100 Incl GST
    Any parts required, or additional labour, is chargeable.

husq-parts.jpg am-parts-husq.jpg

© Stihl Hilti Oleomac Wacker  TE400 TS800 Baumr-AG MFE30 MFE65 TSA230 TS420 TS500i TS700 Quick Cut Saw, Quickcut, Ring Saw, Concrete Chainsaw, Diamond Chainsaw, Wet Saw, Power Cutter, Brick Saw, Con Saw, Demo Saw oilguard
Loading...
-32.1112554,115.8192428

United Diamond Tools

U9, 84 Barberry Way
Bibra Lake
Perth
Western Australia 6163

Telephone: (08) 9434 6878

Email:  sales@udt.com.au