Cut Quick Accessories

Wheel Kit

This wheel kit enables easy movement on flat surfaces or when cutting on the ground.
The rubber pads keeps the machine steady when not used or in idle mode.
Suitable for Husqvarna petrol power cutters K760, K770, K960, K970, K1260 and K1270.

In stock at $225 incl GST

Please note new model wheel kit is slightly different in design, but same principle

Download the Husqvarna Wheel kit instructions

Husqvarna KV7 - Cutting Trolley

Husqvarna cutting trolleys are designed specifically for Husqvarna's hand held petrol power cutters. The quick connections make it easy to install the cutter on the trolley, and the cutting depth is easy to adjust. With a cutting trolley it's easier to cut in straight or curved lines, and close to walls and curbs. The design is compact and they're easy to fold up and transport. Suit K760 and K770.

CUTTING TROLLEY KV 760 Incl. Water Tank - 587 76 84-01 Shown. Saw and blade not included

Husqvarna KV9 - Cutting Trolley

Husqvarna cutting trolleys are designed specifically for Husqvarna's handheld petrol power cutters. The quick connections make it easy to install the cutter on the trolley, and the cutting depth is easy to adjust. With a cutting trolley it's easier to cut in straight or curved lines, and close to walls and curbs. The design is compact and they're easy to fold up and transport. Suit K970 and K1270.

CUTTING TROLLEY KV 970/1260/1270 Incl. Water Tank - 587 76 84-02 Shown. Saw and blade not included

Pressurized water tanks

Golz 10 litre portable pressure tank $299 each, ex stock.                                                                                                                 
No water where you are cutting or coring? This will solve your problems. The 10 litre Golz tank is built tough for drilling and coring situations, and will fit most quick cuts and core drills. It has a pressure gauge built in as  well.

• Maximum pressure 6 bar (87 PSI)
• Maximum flow - 4.5 l/min at 6 bar
• 10 litre capacity

Husqvarna also have a pressurized water tank. Pumping the handle a few times gives the required pressure. The tank holds 13.3 litres and comes complete with a 3-metre hose which is connected to the wet cutting kit on the machine.

Tyrolit have a similar unit at $190 incl GST. We always carry this one in stock as well

Exhaust extraction mufflers and hoses

Remove engine fumes while cutting indoors or in confined spaces.
Suits Husqvarna K960 and K970 demolition saws.
Replace your existing muffler with this after market unit.  $185 incl GST (Full fitting instructions provided below)
Use this "Fume Tube" fume extraction hose  (3.2 metres, incorporates water hose for cooling) to screw on to this muffler and connect to your wet/dry vac.
$850 incl GST

(Must be connected to water and wet/dry vacuum.
Note - water must be plugged in and running before starting saw.
Turn saw off before stopping water.
Otherwise hot exhaust gases will damage Fume Tube.)

Download how to replace Cut Quick muffler

For spare parts, see here

Prices correct as of 1/9/24 but subject to change.