Wet Polishers

We stock the Dymaxion and Eibenstock wet polisher for sale in Perth, WA.
These polishers are for use with concrete, natural stone, engineered stone etc
See our dry polishing pads and accessories to suit here.
See our wet polishing pads and accessories to suit here.

Eibenstock Polisher WPN180 - $775 incl GST

Ideal for polishing different surfaces, edges and curves

Polishing of different surfaces Removal of scratches Suits different surfaces (natural and engineered stone, granite etc) Features: Electronic - soft start, stepless speed control, temperature and over current cut out 60° gearbox allows a better view of the surface, and reaches into tight areas. RCD protection included Dust protected gearbox bearings External water supply below motor TECHNICAL SPECIFICATIONS: Voltage: 230V Power: 1200W No load speed: 1500 - 2800RPM Disc Diameter: Maximum 180mm Spindle: M14 male Machine Weight 4.4 kg Comes with spanner, support handle and manual. 12 month commercial Australia wide warranty.

Dymaxion Grinder/Polisher AGCG125 - $TBA incl GST

For wet grinding and polishing concrete and stone

Polishing of different surfaces Removal of scratches Suits different surfaces (natural and engineered stone, granite etc) Features: Water cooling and lubrication is essential for dust suppression and optimising diamond tool life. Extraction cowl with skirt increases wet vac performance and reduces water fling / spray. Front edge of guard is removable to allow grinding to material edges. Standard wet hose connection. Soft start and RCD protection included TECHNICAL SPECIFICATIONS: Voltage: 240V Power: 1200W No load speed: 1700 - 3700RPM Disc Diameter: Maximum 125mm Spindle: M14 male Weight 2.8kg Comes with spanner, support handle and manual. 12 month commercial Australia wide warranty.

Backing pads:
Backing pads with velcro, M14 fitting suits most angle grinders, polishers etc:
4"/100mm from $35 each incl GST
5"/125mm $55 each incl GST
7"/175mm $75 each incl GST

Prices correct as of 1/3/24 but subject to change.

For the operation for this machine  Click Here 

Silica dust - when workers cut, saw, crush, drill, polish or grind products that contain silica, particles are created, which are one-hundredth of the size of a grain of sand. These can get  stuck deep in the lungs. 
Ensure precautions to limit exposure to dust are in place.
See the WA government's info on silica dust here.

Disclaimer: the information on this website is provided in good faith and believed to be reliable and accurate at this time. However, the information is provided on the basis that the reader will be solely responsible for assessing the information and its veracity and usefulness. UDT shall in no way be liable, in negligence or howsoever, for any loss sustained or incurred by anyone relying on the information, even if such information is or turns out to be wrong, incomplete, out-of-date or misleading.

Weka Shibuya Goltz Total Husky Tool Machinery Mart Blitz Cub Kaladari