Crack Chasing Blades

Needed when cutting out cracks before repairing

Crack chaser blades are engineered to efficiently clean out cracks and imperfections on a wide range of masonry surfaces before repairs can be undertaken. Our 'V' Segment Diamond Blades are designed as a great value blade for cleaning out between concrete, tiles or solid surfaces and for crack chasing. Crack Chaser Blades can be used with angle grinders and tuck pointers for cutting green concrete, block, concrete, hard concrete, pavers and stone. Dry and wet use (depending on the tool).

Crack chasing blades must be used with extreme care and caution.
They are for experienced trades people only.
Always check before use, or if extended operation:
● Blade is securely fastened to spindle.
● Blade guards are in place so cutting is safe
● The operator and operating environment is safe and compliant with all safety regulations and precautions
● Blade flange is not worn or damaged
● Blade runs true, with no vibration
● Wear safety personal protection equipment as per regulations
If you have any doubts, or the blade is damaged in any way, do not use.

Note - If you are cutting dry, always be aware of the danger of breathing in the dust. Ensure a dust extraction system is used with a suitable filter fitted. Use a half face respirator or a PAPR (Powered air purifying respirator). Even if you are cutting wet, the slurry created can dry out and create a hazard for other users - dispose of slurry as per your local regulations. See our dust collection accessories here

Crack Chasing Blades

4"/100mm Diamond Crack Chaser Blade 4"/100mm Diameter 12mm high segments 9.6mm thick 22.2mm Centre $95 incl GST ex stock Perth 5"/125mm Diamond Crack Chaser Blade 5"/125mm Diameter 12mm high segments 9.6mm thick 22.2mm Centre $125 incl GST ex stock Perth 6"/150mm Diamond Crack Chaser Blade 6"/150mm Diameter 6.4mm thick 10mm high V segments 22.2mm Centre $95 incl GST ex stock Perth  7"/180mm Diamond Crack Chaser Blade 7"/180mm Diameter 12mm high  V segments 9.5mm thick 22.2mm Centre $150 incl GST ex stock WA  9"/230mm Diamond Crack Chaser Blade 9"/230mm Diameter 10mm high  V segments 6.4mm thick 22.2mm Centre $195 incl GST ex stock WA

Prices correct as of 1/4/22 but subject to change.

Please see our Contact Us page for Australia wide delivery information.

Disclaimer: the information on this website is provided in good faith and believed to be reliable and accurate at this time.
However, the information is provided on the basis that the reader will be solely responsible for assessing the information and its veracity and usefulness. UDT shall in no way be liable, in negligence or howsoever, for any loss sustained or incurred by anyone relying on the information, even if such information is or turns out to be wrong, incomplete, out-of-date or misleading.

Syntech