Wall Chasers

Here is my range of Eibenstock wall chasers for sale in Perth, Western Australia.
They are all used for milling of slots and ducts in concrete, blocks and brickwork for plumbing or electrical services.

Tip:
Some of these wall chasers have very big motors, so draw a lot of power.
Try to put your vacuum on a seperate circuit, or at least a seperate power point.
Use only heavy duty extension cords, and keep as short as possible.
This will allow the bigger saws to draw their rated power, and perform as specified.

Eibenstock EMF125 Wall Chaser $750 (incl GST, blades & case)

Handy and lightweight - perfect for light duty electrical installations

Features:

Electronic - soft start, temperature control, constant speed
Locking for suction hose - avoids unintentional loosening of the hose during milling
Adjustable milling depth - without the need for a tool
Spindle lock - easy blade change
Slim design, small distance between dust hood and diamond blades for working up to 10 mm from the edge
Slot width of 7-30 mm adjustable in 1 mm increments
Closed hood - optimal air flow, easy removal of fragments
Machine works in cutting direction - allows a comfortable handling
Vacuum nozzle diameter - Ø 35 mm
Replacement blades from $35 each

TECHNICAL SPECIFICATIONS:
Voltage: 230V
Power: 1400W
Rated speed: 7000RPM
Maximum milling depth: 30mm
Maximum cutting depth: 30mm
Disc Diameter :125mm
Spindle: 22.23mm/7/8"
Weight 3.5 kg

Comes with case, two concrete diamond blades, tools & manual.
12 month commercial Australia wide warranty.

Eibenstock EMF150 Wall Chaser

The strong wall chaser up to 45mm milling depth

Features:

Powerful 2300 W motor
Electronic - soft start, temperature and over current cut-off, optical overload indication
Parallel handle position - comfortable working position
Locking for suction hose - avoids unintentional loosening of the hose during milling
Adjustable milling depth - without the need for a tool
Spindle lock - easy blade change
Slim design, small distance between dust hood and diamond blades for working up to 15 mm from the edge
Slot widths of 7 - 46 mm adjustable in 1 mm steps
Closed hood - optimal air flow, easy removal of fragments
Machine works in cutting direction - allows a comfortable handling
Vacuum nozzle diameter - Ø 35 mm
Replacement blades from $40 each
Dry only $1395 inc GST (no water fitting or RCD)
Wet and dry $1595 - shown.
(When wet chasing, the suction nozzle is closed with a plug). Comes with RCD safety switch.
TECHNICAL SPECIFICATIONS:
Voltage: 230V
Power: 2300W
Rated speed: 4300RPM
Maximum milling depth: 45mm
Maximum cutting width: 46mm
Disc Diameter :150mm
Spindle: 22.23mm/7/8"
Wet saw IP20 rating
Weight 6.1kg
- Comes with case, two concrete diamond blades, tools & manual.
- 12 month commercial Australia wide warranty.

Eibenstock EMF180 Wall Chaser- $1895 (1/3/24)

The strong wall chaser up to 60 mm milling depth

Features:

Powerful 2300 W motor
Electronic - soft start, temperature and over current cut-off, optical overload indication
Parallel handle position - comfortable working position
Locking for suction hose - avoids unintentional loosening of the hose during milling
Adjustable milling depth - without the need for a tool
Spindle lock - easy blade change
Slim design, small distance between dust hood and diamond blades for working up to 15 mm from the edge
Slot width of 7-60 mm
Closed hood - optimal air flow, easy removal of fragments
Machine works in cutting direction - allows a comfortable handling
Optional EIBENSTOCK "Easy Break Out" - Fast breaking by a center slot - Distance disks for the using of 3 blades (extra cost)
Vacuum nozzle diameter - Ø 35 mm
See the Eibenstock EMF180 in action at the bottom of this page:
Replacement blades from $60 each

TECHNICAL SPECIFICATIONS:
Voltage: 230V
Power: 2300W
Rated speed: 2200RPM
No load speed: 3100RPM
Maximum milling depth: 60mm
Maximum cutting depth: 60mm
Disc Diameter :180mm
Spindle: 22.23mm/7/8"
Weight 8.2kg

Comes with case, two concrete diamond blades, tools & manual.
12 month commercial Australia wide warranty.

See the Eibenstock Easy Break Out System for the EMF150 and EMF180 here:

See the Eibenstock EMF180 in action here:

Bigger wall chaser have big motors - ensure there is sufficient power available to run them
Do not run off generators - they may not be 240 volt, 50Hz, or are usually too small for the drill
Use only heavy duty (2.5mm minimum but preferably or 4mm) extension cords and keep them as short as possible (under 20m).
Put vacuums on a seperate circuit so as not to overload each circuit.

For the operation and spare parts manuals for these machines Click Here

See our wall chaser blades here

Silica dust - when workers cut, saw, crush, drill, polish or grind products that contain silica, particles are created, which are one-hundredth of the size of a grain of sand. These can get stuck deep in the lungs.
Ensure precautions to limit exposure to dust are in place.
See the WA government's info on silica dust here.

Prices correct as of 1/10/24 but subject to change

Disclaimer: the information on this website is provided in good faith and believed to be reliable and accurate at this time. However, the information is provided on the basis that the reader will be solely responsible for assessing the information and its veracity and usefulness. UDT shall in no way be liable, in negligence or howsoever, for any loss sustained or incurred by anyone relying on the information, even if such information is or turns out to be wrong, incomplete, out-of-date or misleading.

Weka Eibenstock Shibuya Goltz Total Husky Tool Machinery Mart

-32.1112554,115.8192428

United Diamond Tools

U9, 84 Barberry Way
Bibra Lake
Perth
Western Australia 6163

Telephone: (08) 9434 6878

Email: sales@udt.com.au