Tyrolit Diamond Blades

TYROLIT is one of the leading manufacturers of floor grinding, cut-off, sawing, drilling and dressing tools and as a supplier of tool and machine systems for the construction industry. We carry the following blades in stock in Bibra Lake.

Tyrolit Budget Diamond Blades
	The Tyrolit DCU Basic series are a 3.2mm thick economy blade that offers great value for money. For use on universal building materials such as concrete (not reinforced), clay bricks, natural stone, etc. It's harder bond will cope with asphalt or natural limestone, but it will wear faster. Segment height is 10 or 11mm. 1"/25.4mm centre. 14"/350mm Tyrolit DCU blade: $95 incl GST each  ($85 ea for two, $80 ea for three) 16"/400mm Tyrolit DCU blades: $135 incl GST each ($120 ea for two, $110 ea for three)
Tyrolit 416mm Diameter Blade
	Tyrolit DCU 416mm blade - extra depth in cut. Three star blade Universal building materials such as concrete, clay bricks, natural stone, etc. 12mm segment height, 3.2mm thick, 1" centre Always check this blade can safely operate on your machine
Tyrolit Premium DCT blades for ceramic tiles, hard stone and porcelain.
	Thin turbo blade with raised reinforced flange designed for fast, clean cuts. 10"/250mm - 1.6mm thick, 35/30/25mm centre 12"/300mm - 2.0mm thick, 35/30/25mm centre 14"/350mm - 2.4mm thick, 35/30/25mm centre Other sizes also available.
Tyrolit Early Entry blades for early entry saws control zone cutting.
	For cutting in uncured concrete with Tyrolit Early Entry saws, or the Husqvarna Soff Cut saws. 1"/25.4mm centre to suit the Tyrolit saws, or you can knock out the insert to reveal the triangular centre to suit Husqvarna soft cut saws. These purple blades are ideal on hard or medium aggregate. We also have the skid plates and joint spacers if required. 152mm x 2.6mm x 25.4mm $100 incl GST each 165mm x 2.6mm x 25.4mm $110 incl GST each 203mm x 2.6mm x 25.4mm $150 incl GST each 343mm x 2.6mm x 25.4mm $275 incl GST each 358mm x 2.6mm x 25.4mm $300 incl GST each

Coming soon - DCCI Combi cutting and chamfering  blade

It  has been specially developed for plastic pipes.
The cutting edge and the diamond- coated chamfering enable constant and clean cutting and chamfering at the same time.
A cutting depth stop serves as an additional aid. 
125mm diameter only.

Prices correct as of 1/10/20, but subject to change. All prices are each and include GST.

Please see our "Contact Us" page (here) for Australia wide delivery information.

Disclaimer: the information on this website is provided in good faith and believed to be reliable and accurate at this time.
However, the information is provided on the basis that the reader will be solely responsible for assessing the information and its veracity and usefulness. UDT shall in no way be liable, in negligence or howsoever, for any loss sustained or incurred by anyone relying on the information, even if such information is or turns out to be wrong, incomplete, out-of-date or misleading.