Cut Quick Accessories

Wheel Kit

This wheel kit enables easy movement on flat surfaces or when cutting on the ground. The rubber pads keeps the machine steady when not used or in idle mode. Suitable for Husqvarna  petrol power cutters  K760, K770, K960, K970, and K1270

Please note new model wheel kit is slightly different in design, but same principle

husq-wheel-kit.jpeg husqi-wheel-kit.jpeg

Husqvarna KV7 - Cutting Trolley

Husqvarna cutting trolleys are designed specifically for Husqvarna's hand held petrol power cutters. The quick connections make it easy to install the cutter on the trolley, and the cutting depth is easy to adjust. With a cutting trolley it's easier to cut in straight or curved lines, and close to walls and curbs. The design is compact and they're easy to fold up and transport. Suit K760 and K770.

CUTTING TROLLEY KV 760 Incl. Water Tank - 587 76 84-01 Shown. Saw and blade not included

kv7-trolley.png

Husqvarna KV9 - Cutting Trolley

Husqvarna cutting trolleys are designed specifically for Husqvarna's handheld petrol power cutters. The quick connections make it easy to install the cutter on the trolley, and the cutting depth is easy to adjust. With a cutting trolley it's easier to cut in straight or curved lines, and close to walls and curbs. The design is compact and they're easy to fold up and transport. Suit K970 and K1270.

CUTTING TROLLEY KV 970/1260/1270 Incl. Water Tank - 587 76 84-02 Shown. Saw and blade not included
kv9-trolley.png

Pressurized water tanks

Golz 10 litre portable pressure tank $290 each, ex stock.                                                                                                                 
No water where you are cutting or coring? This will solve your problems. The 10 litre Golz tank is built tough for drilling and coring situations, and will fit most quick cuts and core drills. It has a pressure gauge built in as  well.

  • Maximum pressure 6 bar (87 PSI)
  • Maximum flow - 4.5 l/min at 6 bar
  • 10 litre capacity       

golz-tank.jpg

Husqvarna also have a pressurized water tank. Pumping the handle a few times gives the required pressure. The tank holds 13.3 litres and comes complete with a 3-metre hose which is connected to the wet cutting kit on the machine.

husqvarna-water-tanks.png

Husqvarna's WT15 is a compact and easy-to-use 15-litre water tank that helps you work efficiently. It has an electric pump, so there's no manual pumping required. The WT 15 is battery-powered with an 18.5 V Gardena Li-Ion accumulator system.

WATER TANK WT 15 230 V AU - 966 70 83-03 shown

water-tank-wt-15.png

Fuel Can

Husqvarna's petrol can has an effective overfill protection. When your quick cut tank is full, the flow is automatically shut off and you can lift the can up without spillage. In stock, $30 each including GST

 

6-l-fuel-can.png

Transport Box

Husqvarna's transport boxes are handy accessories, both to protect machines and equipment, and and  keep track of the equipment when moving between worksites. They can accommodate machines as well as blades, smaller accessories and personal safety equipment. Made of plywood, with metal reinforcement at edges and corners. Suit K960, K970 and K1260

transport-box.png