Core Drill Motors

Includes 18mm Korean core bit.
3 Speed Handheld Core Drilling Machine. The Husqvarna DM230 core drill three-speed water-cooled gearbox for optimal drilling performance and longer service intervals.
When making a starter hole or cutting through reinforcement speed can be reduced by half using SmartStart.
The handle on the Husqvarna DM230 has an integrated water hose, which together with the electric cable run parallel conveniently from the machine.
The Elgard™ feature available on several of our drill motors means that if the motor on the Husqvarna DM230 core drill runs at too high a load for a long period, it will start to pulsate. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ significantly increases the machine's service life of the Husqvarna DM230 core drill.
Comes with case & manuals.
12 month Australia wide warranty.

TECHNICAL SPECIFICATIONS:
Voltage: 230V
Power: 1850W
Output: RPM 700/ 1700 / 3600 rpm
Output RPM at full load: 580/ 1400 / 2900 rpm
Speeds: 3
Water coupling: G 1/4"
Mounting collar: 60mm
Spindle thread, outer: 1 1/4" 7UNC
Spindle thread, inner: G 1/2" or 5/8" 11UNC
Machine Weight 7 kg
Sound pressure 90 dB(A)
Sound level 94 dB(A)
Hand arm vibration (Aeq) 2,5m/s²

The machine casings are die cast from heavy aluminum and is fitted with three speeds including a low 950 rpm for large diameter hand held coring in soft materials (such as brick and limestone), while still providing 2400 rpm for smaller diameters needed in chemical anchor and glass fence balustrading.

• 1700 watts
• 3 speed
• Max drill dia. Concrete on Rig - 90mm
• Max drilling dia Brick by Hand - 133mm
• 10kg
• 10amp, RCD included
• Mechanical clutch
• 60mm collar

PCD1500SS drill rig suits the PCD1700HH  $395
 - Rig Height from bracket collar to floor 560mm
 - 9kg
 - 90 degrees only

Golz FB33P Core Drill with pistol grip features:

• 2200 watt motor
• 3 speed gearbox (520/1400/2900 RPM)
• 20 to 110mm hand held drilling - Concrete (Wet)
• 20 to 160mm stand mounted - Concrete (Wet)
• 20 to 200mm hand held drilling - Brick (Dry)
• Horizontal and vertical level bubbles
• Soft start and thermal overload protection
• RCD intergrated into power cord
• 1 1/4" UNC (external) and R 1/2" (internal) drill bit connection
• Gardena water connection
• 6.5kg
• Includes carry case and tools

Golz FB33S Core Drill with D handle features:

• 2200 watt motor
• 3 speed gearbox (520/1400/2900 RPM)
• Can be used hand held or with stand
• 20 to 110mm hand held drilling - Concrete (Wet)
• 20 to 160mm stand mounted - Concrete (Wet)
• 20 to 200mm hand held drilling - Brick (Dry)
• Horizontal and vertical level bubbles
• Soft start and thermal overload protection
• RCD intergrated into power cord
• 1 1/4" UNC (external) and R 1/2" (internal) drill bit connection
• Gardena water connection
• 6.5kg
• Includes carry case and tools

 (drill and barrel not included with stand)

Lightweight yet solid, this core drill stand features an aluminum roller carriage.

Golz KB125 Features:

• 12 kg weight
• 650mm travel length
• Suit 250mm maximum diameter core drills
• Laser pointer for accurate drilling
• Angle drilling up to 45 degrees
• Left and right handed operation
• Tool and fastening kit included
• Vacuum base option
• Suits most quality drills - 60mm ring collar

• Maximum pressure 6 bar
• Maximum flow - 4.5 l/min at 6 bar
• 10 litre capacity